No Comparison: Stock stinks! But the new Morimoto XB LED projector fog lights look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, and best of all you won’t need to sell your arm to afford them!
Designed: To fit many modern applications from Infiniti; these complete housings will mount behind the bumper with all of the stock mounting points. Their aim can also be adjusted just like stock with the integrated assembly that’s cast into their shell. Check the compatibility section below for a list of known applications.
Powered: by three Philips Luxeon-T 5000K LED’s that produce around 1200 raw lumens per side. The projector based optics inside concentrate a total of 2400 lumens of pure white light into a beam that’s super wide and perfectly distributed for use as a fog light. They are SAE, DOT, and ECE approved.
Well-Built: Their durable polycarbonate lens should resist the test of time, keeping the housings looking new. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED’s, the housings completely protect the internals from moisture and road debris.
Plug n Play: Wiring is easy too! The XB LED Fogs are designed to work without any special wiring. They will plug into the factory power outlets for the stock fog lights and each fog light includes all necessary connectors (as applicable), rubber seals, and pigtails for a plug n play install.
My review would be my install. They are actually pretty easy to install once you know how to get the old parts out. They are solid feeling units. They are probably twice the weight of the stock fog lights. The light is much better than stock. You’ll have to get a couple longer screws to mount these and you’ll have to drill a hole in the plastic mount on your car in order to access the Morimoto adjustment screw. Other than that they drop in nicely.
Glad you like them! Thanks for the video!