How To align HID & LED projector headlights

0 How To,

  1. Park on a level area facing a large broad wall about 30 feet away
  2. Measure from the ground to your projector inside the headlight (example 30″)
  3. With your headlights on, measure the lower portion of the DRIVER cutoff step. This should be approximately 2″ lower than your projector measurement. Example: 30″ – 2″ = 28″
  4. Align your PASSENGER projector to the driver
  5. Road test & adjust slightly as needed.

 

Correct Cutoff Alignment

Tags: , , , ,

About The Author