Your HID projectors have been double tested prior to them being built into your lights.
If the output on one projector is drastically different compared to the other (ie. fuzzy, blurred, severely-bowed or otherwise NOT sharp) this may be due to a bulb seating issue.
If this is a D2S bulb the socket may be pushing against something causing the bulb to mis-align. Check the socket and re-install – re-seat the bulb as needed.
The same can be checked for H1 bulbs in an MH1 projector system. Remove the bulb and re-seat then test the output.
Posted in: Troubleshoot